CA20P

CA series is a miniature high voltage DC-DC converter. The CA Series is a high performance, precision regulated, high voltage converter with high stability and low ripple, along with a built-in voltage monitor output and an on-board precision voltage reference. It is programmed from 0 to 100% of rated output via a DAC compatible high impedance programming input. The voltage reference can be used to drive the high voltage output at 100% or to adjust the output with an external potentiometer or voltage divider. The output voltage monitor is internally buffered to provide a low impedance (up to 1mA) signal to external circuitry. A quasi-sinewave oscillator, internal transformer shielding, and an isolated steel case reduce EMI/RFI radiation to extremely low levels. Typical applications are photo multiplier tube, solid state detectors, avalanche photodiodes, electrophoresis, piezo devices, capacitor charging, EO lenses.

• A proprietary encapsulation process and custom 94V-0 listed
• High performance formula are used to achieve excellent high voltage and thermal properties
• Precision voltage regulated, on-board voltage reference
• Shielded case with isolated case ground, ultra low ripple, down to 5ppm
• 3 year warranty, 80-250kHz frequency, <lt/>25ppm/°C temperature coefficient
• Output voltage is 0 to +2000V, <lt/>0.001% ripple, dimension is 44.45 x 28.29 x 12.70mm
• Output current is 0.5mA, <lt/>0.01% line/load regulation
• 12V input voltage rating
• Short circuit protection
• Case operating temperature is -10 +50°C