STM32MP215FAL3

STM32MP215FAL3 is an Arm®-based microprocessor featuring a heterogeneous dual-core architecture that combines a 64-bit Cortex®-A35 core running at up to 1.5GHz with a Cortex®-M33 core operating at up to 300MHz. This architecture enables high-level operating systems to run on the Cortex-A35 while delivering deterministic real-time performance through the Cortex-M33. The device supports external memories up to 4GB, including DDR3L, DDR4, and LPDDR4 via a 16-bit SDRAM interface, and integrates 456KB of internal SRAM with ECC for enhanced reliability. It incorporates multi-layer AXI and AHB interconnects with up to 123 secure GPIOs featuring interrupt capability. Advanced security functions include Arm® TrustZone® technology, secure boot, hardware cryptographic accelerators, tamper detection, and comprehensive resource isolation. Multimedia capabilities include an LCD-TFT controller supporting 24-bit RGB displays up to 1920 × 1080 resolution and camera interfaces such as MIPI CSI-2.

• 64-bit Cortex®-A35 with NEON™, TrustZone®, and multi-level cache
• Cortex®-M33 core with FPU, MPU, and TrustZone® support
• Octo-SPI interface and flexible external memory controller
• Multiple power domains, LDO regulators, and low-power modes
• 48-channel DMA system for high-performance data transfers
• Up to 37 communication interfaces including USB, CAN-FD, SPI, and Ethernet
• STNoC interconnect up to 600MHz with 128/64/32-bit bus and 32-bit Arm® AMBA® AHB up to 300MHz
• 1.71 to 1.95V and 2.7/3.0 to 3.6V multiple section I/O supply
• Junction temperature range from -40°C to +125°C
• Available in 361 pins VFBGA package