打印页面
CY7C65632-48AXC
接口, USB, HX2VL架构, USB集线控制器, USB 2.0, 3.15 V, 3.6 V, TQFP, 48 引脚
图片仅用于图解说明，详见产品说明。
753 有货
需要更多？
753 件可于 5-6 个工作日内送达(英国 库存)
| 数量 | 价钱 (含税) |
|---|---|
| 1+ | CNY27.270 (CNY30.8151) |
| 10+ | CNY20.570 (CNY23.2441) |
| 25+ | CNY20.490 (CNY23.1537) |
| 50+ | CNY20.410 (CNY23.0633) |
| 100+ | CNY20.320 (CNY22.9616) |
| 250+ | CNY20.240 (CNY22.8712) |
| 500+ | CNY20.160 (CNY22.7808) |
| 1000+ | CNY20.070 (CNY22.6791) |
包装规格：每个
最低: 1
多件: 1
CNY27.27 (CNY30.82 含税)
品項附註
此订单的信息已添加到您的订单确认邮件、发票和发货通知中。
产品概述
CY7C65632-48AXC is a very low-power USB 2.0 hub controller. It is a high performance, low-power USB 2.0 Hub, optimized for low-cost designs with minimum bill-of-material.
- Compliant with USB 2.0 specification, TID# 30000060, up to four downstream ports support
- Downstream ports are backward compatible with FS, LS, single transaction translator for low cost
- Supports bus-powered and self-powered modes, auto switching between bus-powered and self-powered
- Single MCU with 2K ROM and 64 byte RAM, lowest power consumption
- Integrated upstream pull-up resistor, integrated pull-down resistors for all downstream ports
- Integrated upstream/downstream termination resistors, integrated port status indicator control
- Internal power failure detection for ESD recovery
- Support individual and ganged mode power management, overcurrent detection
- Two port status indicators per downstream port, VID and PID are configurable through external EEPROM
- TQFP-48 package, ambient temperature range from 0°C to +70°C
技术规格
USB集成电路（IC）类型
USB集线控制器
电源电压最小值
3.15V
IC 外壳 / 封装
TQFP
数据率
-
工作温度最小值
0°C
产品范围
-
湿气敏感性等级
MSL 3 - 168小时
USB标准
USB 2.0
电源电压最大值
3.6V
针脚数
48引脚
端口数
4端口
工作温度最高值
70°C
合规
-
SVHC(高度关注物质)
No SVHC (25-Jun-2025)
技术文档 (1)
CY7C65632-48AXC 的替代之选
找到 1 件产品
法律与环境
原产地：
进行最后一道重要生产流程所在的地区原产地：Philippines
进行最后一道重要生产流程所在的地区
进行最后一道重要生产流程所在的地区原产地：Philippines
进行最后一道重要生产流程所在的地区
税则号：85423990
US ECCN:5A991.b.4.b
EU ECCN:NLR
RoHS 合规：是
RoHS
RoHS 邻苯二甲酸盐合规:是
RoHS
SVHC:No SVHC (25-Jun-2025)
下载产品合规证书
产品合规证书
重量（千克）：.000104