X9C103PZ

The X9C103PZ is a Digitally Controlled Potentiometer. The device consists of a resistor array, wiper switches, a control section and non-volatile memory. The wiper position is controlled by a three-wire interface. It is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. This device can be used as a 3-terminal potentiometer or as a 2-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.

• Solid-state
• 3-wire serial interface
• 100 Wiper tap points
• 99 Resistive elements
• Low power CMOS
• High reliability

警告

请勿长时间在最高额定值条件下运行. 长时间暴露在这些条件下可能会影响产品的可靠性, 并导致保修范围之外的故障.

注释

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.