MPQ4313GRE-5-AEC1-P

MPQ4313 is a frequency-programmable, synchronous, step-down switching regulator with integrated internal high-side and low-side power MOSFET. It provides up to 3A of highly efficient output with current mode control for fast loop response. The wide 3.3V to 45V input voltage range accommodates a variety of step-down applications in an automotive input environment. A 1.7μA shutdown mode quiescent current allows the part to be used in battery-powered applications. High power conversion efficiency over a wide load range is achieved by scaling down the switching frequency in light-load conditions to reduce the switching and gate driver losses. An open-drain power good signal indicates whether the output is within 95% to 105% of its nominal voltage. The MPQ4313 is available in a QFN-20 (4mmx4mm) package. Typical applications include automotive infotainment, automotive clusters, advanced driver assistance systems and industrial power systems.

• AEC-Q100 grade 1 qualified
• Internal 48mohm high-side and 20mohm low side MOSFETs
• 350KHz to 530KHz programmable switching frequency for car battery applications
• Switching frequency can be synchronized to external clock
• High-duty cycle and low-dropout mode are provided for automotive cold crank conditions
• Frequency spread spectrum (FSS) for low EMI, out-of-phase synchronized clock output
• Symmetric VIN for low EMI, power good output, external soft start
• 100ns minimum on-time, 18μA sleep mode quiescent current
• Selectable advanced asynchronous mode (AAM) or forced continuous conduction mode (FCCM)
• Low dropout mode, hiccup overcurrent protection

注释

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.