MP4436AGR-P

MP4436A is a synchronous, step down switching regulator with a configurable frequency and integrated internal high-side and low-side power MOSFETs. It provides a maximum 6A of highly efficient output, as well as current mode control for a fast loop response. The wide 3.3V to 45V input range accommodates a variety of step-down applications in an automotive input environment. A 1.7μA shutdown mode quiescent current allows the part to be used in battery-powered applications. High power conversion efficiency across a wide load range is achieved by scaling down the switching frequency in light-load conditions to reduce the switching and gate driver losses. An open-drain power good signal indicates that the output is within 93% to 106% of its nominal voltage. Frequency foldback helps prevent inductor current runaway during start-up. Applications include automotive infotainment, automotive clusters, advanced driver assistance systems (ADAS) and industrial power systems.

• 18μA sleep mode quiescent current, High duty cycle, low-dropout mode, available in a QFN-20 package
• Hiccup mode for overcurrent protection
• Internal 48mohm high-side and 20mohm low side MOSFET
• 350KHz to 530KHz configurable switching frequency for car battery applications
• Synchronize to external clock, multi-phase capability
• Out-of-phase synchronized clock output
• Frequency spread spectrum (FSS) option for low EMI
• Symmetric VIN for low EMI, power good output, external soft start, 100ns minimum on time
• Thermal shutdown provides reliable, fault-tolerant operation
• Selectable advanced asynchronous mode (AAM) or forced continuous conduction mode (FCCM)

注释

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.