MCP2561-E/P

产品概述

• 产品概述

  The MCP2561-E/P is a high-speed CAN Transceiver serves as the interface between a CAN protocol controller and the physical bus. The MCP2561 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898-5 standard. It will operate at speeds of up to 1Mb/s. Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output). It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources. It has under-voltage detection on both supply pins: VDD and VIO. Typical under-voltage thresholds are 1.2V for VIO and 4V for VDD. When the device is powered on, CANH and CANL remain in a high-impedance state until both VDD and VIO exceed their under-voltage levels.

  • Supports 1Mb/s Operation
  • Implements ISO-11898-5 standard physical layer requirements
  • SPLIT Output pin to stabilize common mode in biased split termination schemes
  • CAN bus pins are disconnected when device is unpowered
  • An unpowered node or brown-out event will not load the CAN bus
  • Permanent dominant detection on TXD
  • Permanent dominant detection on bus
  • Protection against damage due to short-circuit conditions
  • Protection against high-voltage transients in automotive environments
  • Automatic thermal shutdown protection