TEN 50-4812WI

TEN 50WI series is a range of isolated high performance DC/DC converter modules. With a very high efficiency and the use of highest reliable components these 50W converters can be packed into the standard 1.0” x 2.0” casing. The models have a wide 4:1 input voltage range and a tight output voltage regulation. They do not need a minimum load and offer a high efficiency also at low load conditions. The output voltage is adjustable by external resistor. Remote on/off and protection against overload and short circuit are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Complies to CAN/CSA-C22.2 No 60950-1-07, 2nd ed; A1:2011, ANSI/UL No. 60950-1, 2nd ed.; A1:2011, IEC 60950-1:2005 (2nd edition); Am 1:2009, EN 60950-1:2006/A11:2009/A1:2010/12:2011, IEC/EN 62368-1, UL 62368-1 safety standards.

• Very high power density
• Operating temperature range from -40°C to +80°C
• Hiccup mode, automatic recovery short circuit protection, protection against overtemperature
• No minimum load required
• Adjustable output voltage
• I/O isolation voltage of 1500VDC
• 3-year product warranty
• Switching frequency of 285KHz typically
• Casing is aluminium alloy, 6-side shielded, insulating baseplate
• Epoxy (UL 94V-0 rated) potting material