OPA452FAKTWT
OP-AMP, SINGLE, 1.8MHZ, 7.2V/US, TO263-7
需要更多？
| 包装类型 | 数量 | 单价 (不含增值税): | 合计 |
|---|---|---|---|
| 复卷 | 1 | CNY60.280 | CNY60.28 |
| 数量 | 价钱 (含税) |
|---|---|
| 1+ | CNY60.280 (CNY68.1164) |
| 10+ | CNY46.620 (CNY52.6806) |
| 25+ | CNY43.190 (CNY48.8047) |
| 50+ | CNY41.310 (CNY46.6803) |
| 100+ | CNY39.420 (CNY44.5446) |
| 250+ | CNY37.580 (CNY42.4654) |
| 500+ | CNY35.910 (CNY40.5783) |
产品信息
产品概述
The OPA452FAKTWT is a single Operational Amplifier with high-voltage (80V) and high-current capabilities (50mA). The OPA452 is unity-gain stable and has a gain bandwidth product of 1.8MHz. It is internally protected against over-temperature conditions and current overloads. Power supplies in the range of ±10 to ±40V can be used. Unlike most other power op amps, the OPA452 has ensured specifications over the entire power-supply range. This laser-trimmed, monolithic integrated circuit provides excellent low-level accuracy along with wide output swing. Special design considerations assure that the product is easy to use and free from phase inversion problems often found in other amplifiers.
- Fully protected - Thermal shutdown and output current-limited
- Continuous output short-circuit
- 50mA Continuous high output load drive
- 1V to rail Wide output voltage swing
- 5µV/°C Offset drift
- 94dB Typical CMRR
- Green product and no Sb/Br
技术规格
1放大器
10V/µs
TO-263 (D2PAK)
高电压
1mV
表面安装
125°C
-
No SVHC (27-Jun-2018)
-
1个放大器
1.8MHz
± 10V 至 ± 40V
7引脚
-
7pA
-55°C
-
MSL 3 - 168小时
TO-263 (D2PAK)
1.8MHz
10V/µs
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地：United States
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书