NC4FRX

The NC4FRX from Neutrik is a 4 pole right angle extra slim female XLR cable connector. This cable connector has boot with polyurethane gland gives high protection to cable bending stresses. The female contact incorporates a solder barrier to prevent solder running into the contact mating area and unique cage design for low contact resistance, high integrity. This female connector with improved solid metal latch which is larger and easier to handle. This is a sleek, valuable and handy connector with ergonomic design.

• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier & faster
• Polyamide (PA 6.6 30 % GR) insert, brass (CuZn39Pb3) contacts with silver plating
• Zinc die-cast (ZnAl4Cu1) shell with nickel plating
• Coloured rings and boots available for coding or identification
• UL ECBT2.E135070 and cUL ECBT8.E135070 certified
• Dielectric strength of 1.5KVDC, 10A rated current per contact and rated voltage <lt/> 50V
• Lifetime <gt/> 1000 mating cycles, maximum wire size of 16AWG (1.5 mm²)
• Flammability rating meets UL 94 HB and IEC 61076-2-103 standard compliance, IP 40 protection class
• Temperature range from -30°C to +80°C