FUSB2805MLX

FUSB2805MLX is a USB2.0 high-speed OTG transceiver with ULPI interface. This UTMI+ low-pin interface (ULPI) transceiver is compliant with the universal serial bus specification Rev 2.0 (USB2.0), the ULPI Specification Rev. 1.1, and the On-The-Go (OTG) supplement to USB2.0. This is optimized to connect the USB2.0 host, peripheral, or OTG-controller to the USB connector via the ULPI link. Data can be transmitted and received at high speed (480Mbps), full speed (12Mbps), and low speed (1.5Mbps) through a 12bit (SDR) interface. Applications include set-top box video camera, MP3 player, cell phone, digital still camera, PDA, DVD recorder, scanner, printer.

• Complies with USB 2.0, OTG Rev 1.3 supplement, and ULPI Rev 1.1 specifications
• Integrated termination resistors meet USB2.0 resistor ECN
• Integrated serializer and deserializer
• Insertion and removal of stuffed bits as appropriate
• USB clock and data recovery to ±150ppm
• Supports USB OTG Rev 1.3 host negotiation protocol and session request protocol
• 15kV ESD, IEC 61000 board level, air gap
• 1.4V maximum power-on reset trip voltage (referenced to VDDIO supply)
• 25mA typ operating supply current (full-speed data at 12MHz, 50pF load)
• 32 terminal MLP package, operating temperature range from -40 to +85°C