LCMXO2-4000HC-6FTG256I

LCMXO2-4000HC-6FTG256I is an ultra low power, instant-on, non-volatile PLD FPGA. In addition to LUT-based, low-cost programmable logic, this device features embedded block RAM (EBR), distributed RAM, user flash memory (UFM), phase locked loops (PLLs), preengineered source synchronous I/O support, advanced configuration support including dual-boot capability and hardened versions of commonly used functions such as SPI controller, I²C controller and timer/counter. These features allow this device to be used in low cost, high volume consumer and system applications. The MachXO2 device is designed on a 65nm non-volatile low power process. This device architecture has several features such as programmable low swing differential I/O and the ability to turn off I/O banks, on-chip PLLs and oscillators dynamically. Applications include consumer electronics, compute and storage, wireless communications, industrial control systems, automotive system.

• 4320k logic capacity, standard device I/O count, high performance
• 2.5V/3.3V supply voltage, fastest speed
• Advanced 65nm low power process, as low as 22μW standby power
• Programmable low swing differential I/O
• Dedicated FIFO control logic, 100,000 write cycles
• Accessible through WISHBONE, SPI, I²C and JTAG interfaces
• Can be used as soft processor PROM or as flash memory
• DDR registers in I/O cells, dedicated gearing logic, 7:1 gearing for display I/O
• Generic DDR, DDRX2, DDRX4, dedicated DDR/DDR2/LPDDR memory with DQS support
• 256 lead ftBGA package, industrial operation junction temperature range from -40 to 100°C